What goes where
Tap a part to see the best choice
Best · Inside
Foam board
On the foundation wall, use plain Kingspan foam board with sealed seams, then frame a wall in front.
Get a QuoteBest · Framed wall
Batts
In the framed basement wall, use paper-faced Knauf Insulation batts or ROCKWOOL Comfortbatt.
Get a QuoteBest · Crawl floor
Plastic liner
Lay plastic (poly) liner over the floor and up the walls, overlapping seams 12 inches and sealing them with double-sided butyl tape.
Get a QuoteBest · Crawl wall
Board or closed cell
Plain foam board with masonry fasteners and button-cap washers, or closed-cell spray foam. Cover either as the crawl space guide shows.
Get a QuoteBest · Rim joist
Closed cell
Use closed-cell foam or foam board cut to each bay; see how thick foam can go bare.
Get a QuoteFoam, liner and batts
- Foam board: Kingspan foam board (XPS) comes in 4 x 8 ft sheets, 1.5 or 2 in. thick. Pallet counts and R-value.
- Closed-cell foam: the 205 or 605 board-foot kit (Handi-Foam E84 205BF or 605BF, by ICP), or Green Valley's rig foam (GVP 2.0 Closed Cell High Elevation).
- Liner: We carry plastic liner in 6, 10 and 15 mil.
- Batts: Knauf Insulation R-11 to R-21 or ROCKWOOL Comfortbatt R15 and R23. Sizes.
- Seams and edges: Use butyl tape, sill sealer, Handi-Foam Fireblock foam and Gardner A2 caulk.
Liner sizes and pins
- 6 mil: clear, 10 or 20 x 100 ft; black, 8, 10 or 20 x 100 ft; DuraSkrim reinforced clear, 20 x 100 ft.
- 10 mil: black or white, 20 x 100 ft. 15 mil: yellow, 14 x 140 ft.
- Butyl tape and sill sealer: 2 in. x 50 ft.
- Pins: 2.5 in. with washers, or Simpson 1-1/2 in. with plastic washers. Ask which suits your wall.
Frequently asked questions
What do I need to seal a crawl space?
A taped liner, insulated walls and rim joists, and a way to dry the air. The crawl space guide has the steps in order.
Which liner thickness should I order?
6 mil is the Department of Energy minimum. 10 or 15 mil is a durability choice.
How much liner and board do I order?
Liner: the floor area, plus the run up each wall, plus 12 in. at every seam. Board: the wall area you insulate, in 4 x 8 ft sheets.
Reviewed by the Pop Supply team ·
Sources (9)
- DOE Building America, unvented insulated crawlspaces
- DOE Building America, capillary break sheeting
- DOE Building America, no vapor retarders
- DOE Building America, rigid foam for band joists
- DOE Building America, spray foam guide (2009-04)
- ROCKWOOL, Comfortbatt product page
- ROCKWOOL, Comfortbatt technical data sheet (2026-07)
- ICC-ES, ESR-2717, Handi-Foam E84 (2026-07)
- Green Valley Products, spray foam product line
Related pages: Crawl space guide · Rigid board · Spray foam · Batts and mineral wool · Delivery area · Trade accounts
