Board foot calculator
From the product data sheet
Enter the area and thickness.
Board feet = area × thickness × (1 + waste ÷ 100). Sets = board feet ÷ yield, rounded up.
1,200 sq ft example
- Area: 1,200 sq ft
- Thickness: 2 in
- Board feet: 2,400
- Waste: 10%
- With waste: 2,640
- Board feet per set: Your foam's yield
- Sets, rounded up: 3
Divide 2,640 by the board feet one set yields. If you get 2.1 sets, order 3.
Mixed thicknesses
- Use net area, with openings taken out. Run each thickness on its own, then add the board feet.
One board foot
Yield per set
What a Handi-Foam kit yields.
205 board-foot kit (E84 205BF)
Up to 205board feet
605 board-foot kit (E84 605BF)
Up to 605board feet
If the foam's data sheet lists no yield, ask the maker in writing.
What lowers yield
ICP's operating instructions call their yields optimum. These lower them:
- Surface temperature. Extremes can lower yield.
- Cold chemical. ICP's cold weather bulletin says stop spraying at 60°F and below.
- Thick passes. Follow your maker's limit. Green Valley's high-elevation closed-cell foam (GVP 2.0 High Elevation) sets 4 in per pass.
- Altitude. The Green Valley high-elevation data sheet gives roughly 4,000 to 10,000 ft. Ask the maker whether elevation changes yield.
Frequently asked questions
How many square feet does a set of closed cell foam cover?
It depends on the foam. Divide the board feet one set yields by your thickness in inches.
Why did my kit yield less than the data sheet says?
The data sheet number is a best case. Foam packed into a wall can come out denser.
Do you help with spray foam take-offs?
Yes. Send the plans with your quote request.
Sources (4)
- ICP, Handi-Foam kit operating instructions (A16600) (2024-11)
- ICP, Handi-Foam E84 data sheet (TD062) (2025-10)
- ICP, Handi-Foam cold weather bulletin (2021-10)
- Green Valley Products, GVP 2.0 HFO data sheet (2025-05-20)
Related pages: Spray foam · Handi-Foam kits · Open vs closed cell · Trade accounts · Delivery area · Contractor guides
